Real jobs, photographed on site — not stock images. Eight installations across Vancouver, Burnaby, New Westminster and Pemberton — homes, condos and a school, including the subfloor prep that most galleries leave out.
Every photo below is from a Craftbuild installation. Where we have them, the before shots are included — the subfloor is where a flooring job is won or lost, and it is the part you never see once the planks are down. Client names and addresses are withheld.
Engineered hardwood glued down across the main hall of École La Vallée, a school in Pemberton. Before a single board went in, every seam in the plywood subfloor was patched and levelled — on a floor this size, any high spot shows up later as a squeak or a lifted edge. Glue-down keeps a large commercial floor solid and quiet underfoot, even with a school’s worth of traffic.
Luxury vinyl plank through the bedrooms, hallway and closets, then the same board carried up the staircase — treads and risers both. Stairs are the slow part: every tread is cut and scribed on site and the nosing has to line up down the whole flight. Most galleries stop at the flat floor because that is the easy half.
Wide-plank white oak installed with the glue-down method across the main living areas, hallways, kitchen and dining room. Glue-down gives a solid underfoot feel with no hollow sound — the right call in a character home where the subfloor and room shapes are anything but square.
A high-rise unit taken from bare concrete to finished floor. The slab was levelled first, then waterproof SPC plank was laid throughout. Concrete in towers is rarely flat enough to install over directly — the prep is what stops the clicking and gapping later.
Vinyl plank through the living room, kitchen, dining area and hallway, with the staircase wrapped to match. Stairs are the part most installers quote around; matching them to the floor is what makes the job read as one piece instead of two.
Concrete subfloor prepped and levelled, then laminate installed throughout. The before photos show what most slabs actually look like once the old covering comes up.
Decades of old adhesive stripped off the plywood subfloor, the low spots patched and screeded flat, then hardwood glued down. Most of the work on a job like this happens before a single plank goes in.
Laminate laid through the bedrooms, hallway and kitchen of a vacant unit. Running one continuous floor with no thresholds between rooms makes a small space read larger.
Book a free on-site visit. We measure, check the subfloor and give you a written quote — no pressure, no obligation.
Get a Free Quote →